JTech Laser

Help for setting up your file.

1. Make files in .dxf formats.
2. Draw parts actual size.
3. Make one single line, "continuous" do not overlap lines.
4. Parts to be cut go on one layer. If you need parts labeled, place these on a second      layer.
5. Arrange your parts as you want them to be cut.
6. Leave 1/8" minimum around the sheet perimeter and between parts.
7. One sheet per file.
8. ID material and thickness. (i.e. Balsa 1/16 x 3 x 36)
9. Text must be exploded.
10. Use polylines instead of splines. If you need to use splines, make sure they are exploded. Keep in mind that splines will slow the laser down and increase laser    time.
11. Parts can have tabs so they remain in the sheet after they are cut. If wood, a    minimum of 2 tabs per part oriented with the grain.
      Contact us if you have questions.

See pdf article for help.

Contact information:
JTech Laser
Mesa, AZ
Email: jtech@jtechlaser.com
Owners / Operators James and Tina Wagoner